• Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Rope End Ball, 12.5mm, 3.5mm hole, available in black, red, blue, green and white
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption
  • Machine
    Die Number
    Material
    Colour and %
    Num of cavities
    Die Cooling
    Temperatures
    Sec1 Sec2 Sec3 Sec4
    Clamping Unit Mould Open
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Mould Close
    Pressure Speed Pos
    1st
    2nd
    Protect
    High Press
    Injection
    Pressure Speed Pos
    1st
    2nd
    3rd
    4th
    Notes
    Holding
    Pressure Speed Time
    1st
    2nd
    3rd
    Cooling Time (secs):
    Charge
    Pressure Speed Pos
    Charge 1
    Charge 2
    Suckback
    Charge Mode
    Ejection
    Pressure Speed Pos
    Advan 1
    Advan 2
    Back 1
    Back 2
    Eject Mode
    Eject Count
    Eject Delay
    Eject Hold
    Nozzle/Purge
    Nozzle Back Time (secs)
    Other
    Cycle Time (secs)
    Saved as No.
    Labour (secs)
    Part Weight
    Sprue
    Part
    Consumption

Go to Top